Essex Electronics K1 Series Instrukcja Obsługi Pobierz pdf (Strona 13)

Essex Electronics, Inc. | 805.684.7601 | 800.KEY-LESS | fax 805.684.0232 | keyless.com

4. Once the Keypad is in configuration mode, enter 0099#. The

Keypad will beep twice and both LEDS will flash for approxi-

mately 10 seconds. (During this time, the Keypad will appear

dead. Do NOT remove power!)

5. Enter 98 followed by #. You should hear 3 beeps indicating

successful configuration (the RED LED will continue to flash

and the GREEN LED will be solid). If you hear a long error

beep, re-enter 98 followed by #. To change the audible beep

or illumination, proceed as follows. Otherwise, go to step 6.

a. To change the audible beep, enter the code as follows:

Code Audible Beep

201 # Normal Beep (factory default)

200 # Short Click (quieter)

b. To change the illumination on the K1-26 only, enter the

code as follows:

Code Standby Mode Normal Operation

210 # Off (factory default) Off (factory default)

211 # Off Dim

212 # Off Bright

213 # Dim Dim

214 # Dim Bright

6. Remove power.

7. Remove configuration jumper.

8. Re-apply power.

9. Press PROGRAM button in the ERM to establish the encoded

connection. This will put the system into setup mode.

10. Press * * to exit.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 39 40

Brak uwag

Essex Electronics K1 Series Instrukcja Obsługi Strona 13